digweed Posted October 27, 2005 Report Share Posted October 27, 2005 anyone with vag-com in ireland. i'm thinking of getting cruise control and i'm told i will need to have it turned on??? thanks. D. Link to comment Share on other sites More sharing options...
TonyD Posted May 4, 2006 Report Share Posted May 4, 2006 Hi guys Is there anyone from Cambridge (Cambs) with VAGCom please who could help me out with diagnosing a fault? Thanks Tony. Link to comment Share on other sites More sharing options...
Scotty Posted May 4, 2006 Author Report Share Posted May 4, 2006 Junc7 M11 too far? If not let me know via email/IM Link to comment Share on other sites More sharing options...
biker_bits Posted June 6, 2006 Report Share Posted June 6, 2006 Yep, I'm nr Worthing - in UK. Link to comment Share on other sites More sharing options...
paul_tdi Posted June 7, 2006 Report Share Posted June 7, 2006 HI Scotty, Added my details as I have VAG.com and will try to help where I can! Paul Link to comment Share on other sites More sharing options...
Scotty Posted June 7, 2006 Author Report Share Posted June 7, 2006 Good man! Link to comment Share on other sites More sharing options...
paul_tdi Posted June 7, 2006 Report Share Posted June 7, 2006 Least I could do mate! There have been loads of people on here that have been prepared to help even though I am a newbie!! Link to comment Share on other sites More sharing options...
TDiAvant Posted June 9, 2006 Report Share Posted June 9, 2006 Just added myself to the database, got the gear but no idea..... Link to comment Share on other sites More sharing options...
Scotty Posted June 9, 2006 Author Report Share Posted June 9, 2006 "got the gear but no idea" Welcome to the club! Link to comment Share on other sites More sharing options...
Motormouth Posted July 27, 2006 Report Share Posted July 27, 2006 Anyone Middlesex, West / North London Area ? :0) Link to comment Share on other sites More sharing options...
PetrolDave Posted August 1, 2006 Report Share Posted August 1, 2006 I have a HEX-COM+CAN plus VAG-COM 607.2 running on a Dell laptop. Due to unemployment I can help out anyone near Southampton (Hants, Dorset, West Sussex) needing access to VAG-COM. Either you come to me, or I'll come to you if you'll cover the cost of my petrol (and you'll get to see/hear an RS4! ). PM me if interested. Link to comment Share on other sites More sharing options...
Sponge Posted August 15, 2006 Report Share Posted August 15, 2006 [ QUOTE ] "got the gear but no idea" Welcome to the club! [/ QUOTE ] Can I apply too? I haven't actually got it in my grubby little mitts yet, but it's winging its way as we speak. VAG-COM License with HEX-USB+CAN Interface Oh yes, based just north of Liverpool. Link to comment Share on other sites More sharing options...
Wobby Posted August 15, 2006 Report Share Posted August 15, 2006 [ QUOTE ] VAG-COM. and you'll get to see/hear an RS4! . [/ QUOTE ] ........and drive maybe? I have my own VAG COM, but i can pretend for a go in an RS4 Link to comment Share on other sites More sharing options...
Shock Posted October 22, 2006 Report Share Posted October 22, 2006 My car needs to be diagnosed properly.. The engine keeps cutting out after about 2 mins. Had it diagnosed by a local mechanic, on his laptop (not VAG COM) it came up as "HALL TRANSDUCER" as the error, so got the part from Audi and replaced it but still got the same fault!!!! Im guessing his diagnostic software was some cheap stuff.. can anyone with VAG COM help? Im near Gants Hill in Essex. Got a old shape A3? Link to comment Share on other sites More sharing options...
David Wilson Posted November 3, 2006 Report Share Posted November 3, 2006 Hi, I use Vag-Check rather than Vag-Com, which is essentially a PDA version of the VAG diagnostic software. I have the latest version including lead which is fully CANBUS compliant and will carry out essentially the same checks as Vag-Com. If interested I can put this on the database. I am based in the far North of Scotland so would be useful for anyone based up here. Link to comment Share on other sites More sharing options...
Scotty Posted November 4, 2006 Author Report Share Posted November 4, 2006 Good idea. Go for it as I know there's only a handful registered up there. Link to comment Share on other sites More sharing options...
David Wilson Posted November 4, 2006 Report Share Posted November 4, 2006 OK, Now on Database. Noticed that this database is predominantly US based. Any benefit in this web site starting up its own UK based database? regards Link to comment Share on other sites More sharing options...
Scotty Posted November 4, 2006 Author Report Share Posted November 4, 2006 I wouldn't think so. Just keep adding to that one otherwise you'll end up with forum registers instead of a register for everyone. Link to comment Share on other sites More sharing options...
chrislambert74 Posted November 6, 2006 Report Share Posted November 6, 2006 Hi, looking for someone that would install and program my VAG COM. Installing rns-e + Media Interface into A4 cab 56 plate. Needs to be located near me on the south coast - I live in Bournemouth. Link to comment Share on other sites More sharing options...
PetrolDave Posted November 10, 2006 Report Share Posted November 10, 2006 [ QUOTE ] Hi, looking for someone that would install and program my VAG COM. [/ QUOTE ] VAG-COM installs itself - just download it from the Ross-Tech website, and click on the file. It installs itself and puts an icon on your desktop. Connect the lead to your laptop and your car, turn the ignition on, click on the VAG-COM icon and then the Test button. VAG-COM is now fully installed and working. Link to comment Share on other sites More sharing options...
gizze Posted January 29, 2007 Report Share Posted January 29, 2007 I have now got a Hex+usb+can unit so can help anyone out in the Norfolk, Suffolk, Cambs area. Link to comment Share on other sites More sharing options...
naleca Posted February 9, 2007 Report Share Posted February 9, 2007 I purchased the autonostics vag com usb cable of e-bay and wondering what program to use as it tells me I can only use version 409.1 but were do I get it and what price or is there an alternative Link to comment Share on other sites More sharing options...
PetrolDave Posted February 9, 2007 Report Share Posted February 9, 2007 [ QUOTE ] it tells me I can only use version 409.1 but were do I get it [/ QUOTE ] Try here. Link to comment Share on other sites More sharing options...
weedavey Posted February 12, 2007 Report Share Posted February 12, 2007 Anyone with VagCom in Northern Ireland??? Link to comment Share on other sites More sharing options...
wrh3 Posted June 1, 2007 Report Share Posted June 1, 2007 [ QUOTE ] It might be an idea for all willing owners of VAG-COM to register their details HERE It will then help those searching for assistance. I've been on it for a couple of years and it's helped a few people out. [/ QUOTE ] http://www.steve-hall.com/cgi-bin/VAG-Locator.pl is going offline June 30. I have offered to host the existing database provided I can import it and have set up a database for these and new entries at http://www.vagcomlocator.com . The search will make it possible to find owners of not only VAGCOM but other VAG tools such as the Haldex Filter tool for our R32. Let me know what you think, I am by no means a web guru and this is a ready made database provided by my hosting service, but it should serve the purpose Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now