Jump to content

Indicator problem


Waitey
 Share

Recommended Posts

Hi all

I have just started experiencing problems with my indicators, when i indicate the lights flash sometimes once or twice or not at all. I have read on previous posts that this could be down to the relay which is part of the hazard warning switch, which costs about £15. Is it easy to fit if so how. Just a further point when i am sat in the garage and try the indicators i they work more often could this be something else rather than the relay.

Thanks in advance 169144-ok.gif

Bigal

Link to comment
Share on other sites

Hi mate.

Just looked in the haynes for you and the relays are located behind the trim panel next to the steering column. Picture in manual is pretty vague but i think it is to the right and down. Operate your indicators and you should hear the relay click when it operates. If it is intermittent in operation try giving it a light tap to check if the contacts are sticking. I would imagine that your fault lies here.

Let me know how you got on.

Link to comment
Share on other sites

Yep, thats the relay then, built onto the back of the switch. On mine i lifted a piece of dash (to the right of the switch) so i could get my hand behind (had to remove a couple of screws) and then pushed the hazard switch forwards so it slides out of the front of the dash.

If its the same relay as mine i can post you one to try if you want? It didn't fix the problem i had so i now have a spare. If it fixes it you can keep it, if not, stick it back in the post and i will keep it as a spare.

I will post a pic when i get chance, but i think they will be differant on your model? I think relay/ switch was about £15 from a dealers

Hope this helps

Link to comment
Share on other sites

No, differant problem. On mine the relay chatters for no reason. The indicators always work fine! The chattering stops if you turn them on. Only thing it could be now is the indicator stalk (or wiring). Not changed it as i was/ still am going to fit cruise control and its on the same stalk.... kill 2 birds with one stone smile.gif

I would get the relay out and move/ check the wires see if it could be a loose wire. Try the wiring onto the indicator stalk as well, just see if it could be a bad connection or broken wire.

Then try the indicator, i am away for a few days this weekend. But if you've not got a relay (and i can find my spare and it fits!!!!) Your welcome to try it. Better to try one than do what i did and end up with spares and still have the problem 169144-ok.gif

Link to comment
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
 Share

×
×
  • Create New...